Take advantage of a high-performance ATmega328P microcontroller at the heart of GOBLIN 2. Develop your ideas with Arduino IDE and Atmel Studio. Upload your code to the board via micro USB. Plug your devices and start exploiting the possibilities of the IoT.
Connect devices easily. Open your creativity with the RS-485 industrial protocol, Arduino Shields, servo motors, displays, ando more.
Built-in Dual-Band HSDPA/WCDMA and Quad-Band GSM/GPRS/EDGE connectivity module. Cellphone network up to 3.5G. High accuracy 16-channel GPS.
Voltage converter up to 24V. Automatic management of lithium-io batteries with solar panels, USB or wall adapter power supply. Ideal for projects (almost) anywhere.
Dimensions: 65.5mm x 82.2mm
ATmega328P CPU Speed 16 MHz A1KB EEPROM 32kb Flash 2kb SRAM
External Power Input
MicroUSB 2.0 Solar Panel 5V up to 200mA 3.7V battery charger
3.3V: 300mA 5V: 3A 24V: 500mA
Solar Panel 5V up to 200mA MicroUSB 2.0 - 5V
Power ON-OFF Select RS-485 or Digital PIN 7,8 Select PROGRAM or SIM AT+
Power ON: LED Green Charging Battery: LED Blue Discharge Battery: LED Red Status NET: LED Green Transmitter RS485: LED Red Receiver RS485: LED Green UART RX: LED Red UART TX: LED Red
6 ADC input - 10 bits resolution 10 digital in/out - 5 PWM 1 Micro USB Up to 115.2k baud
SIM5320A with Header USB 2.0 interface Header to Keypad, microphone and speaker for SIM I/O High accuracy 16 channel GPS RS-485 protocol 10Mbps Up to 256 nodes on the bus